Pyroshield Syn Open Gear Grease is a heavy-duty synthetic lubricant developed for large unshrouded open gears in the mining,
mineral processing and cement industries, and for other severe service applications that require a lubricant with superior wear
protection, exceptional load-carrying ability, outstanding tackiness and ease of application at various temperatures. It also works well for applications in which gears experience high point-of-contact temperatures of 327°C (620°F) and above.
A product of advanced lubricant technology providing boundary lubrication, unmatched performance and versatility, Pyroshield
Syn Open Gear Grease is formulated with high-viscosity 100 percent synthetic base oil, a non-melting thickening system
and LE’s proprietary heat stable additives. It contains a synergistic mix of Almasol®, LE’s exclusive wear-reducing additive, and
a unique combination of extreme pressure additives.
Wirelife® Almasol® Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal
and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects
better than any product available. When used in conjunction with Wirelife Monolec® Penetrating Lubricant, maximum
protection and wear reduction is achieved. In addition to its primary function as a coating, it also provides moderate penetration – depending on the tightness of tolerances and the temperature when applied. It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a self-healing, nontacky, protecting film that is highly resistant to wash-off from both fresh and salt water.
Monolec Ultra® Engine Oil is an SAE 15W-40 engine oil that provides exceptional extended-drain service for diesel engines in mobile equipment and stationary generators. With its superior formulation of select base oils, shear-stable viscosity improver and Monolec®, LE’s exclusive wear-reducing additive, Monolec Ultra offers increased fuel efficiency, dependable all-weather performance and outstanding wear protection.
Monolec Untra Engine Oil
Size: 1 Liter.
Monolec® Multiplex Lubricant (4622) is a highly versatile, long-life, lithium-complex-thickened grease designed for extreme pressure (EP) performance in a variety of farm, fleet, industrial and marine applications. It provides dependable performance in a broad operating temperature range in chassis, wheel bearings and other critical grease points.
Size: 10 Tube.
LE's 2300 L-X® Heavy Duty Chemical Supplement is a combination of oils and chemicals which has been carefully selected utilizing an advanced formulation. It has a unique ability to permeate metal to help today's internal combustion engines achieve maximum performance.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Size: 1 Pint.
Outstanding aerosol food grade penetrating oil and lubricant. Works quickly to dissolve rust and free-up frozen parts. Rapidly penetrates and leaves a heavy lubricant film for further lubrication and corrosion prevention. Formulated from USP Grade mineral oils and other USDA H1 rated components. Contains LE's proprietary additive, QUINPLEX®.
Any area where a penetrating and lubricating oil suitable for incidental food contact is required. This includes bottling and canning equipment, food processing machinery, slides, cams, chains and other machine surfaces.
LE's Monolec® Ultrablend Engine Oil (8130) provides optimum performance and protection for diesel and gasoline engines. This SAE 10W-30 engine oil provides all-weather performance, including effective cold cranking at low ambient temperatures and excellent performance at higher temperatures. It also provides maximum wear performance, crucial for fleet and passenger car protection.
This balance of all-weather performance and engine wear protection is achieved through a carefully selected blend of synthetic and paraffinic base oils and an additive package that includes Monolec®, LE's exclusive wear-reducing additive
H1 Quinplex® Food Machinery Lubricant (4025-4022) is a semisynthetic
grease suitable for a broad operating temperature range.
In addition to being a food grade grease – NSF H1 registered for
incidental food contact – it is also robust enough to withstand
moisture, high temperatures, extreme pressures and other harsh
conditions found at food manufacturing plants. It features an
aluminum complex thickener base, providing extreme water
resistance, excellent mechanical stability, reversibility and tackiness.
Key additives include Quinplex, LE’s proprietary impact-resistant
additive, and a rust and oxidation inhibitor. Switching to H1 Quinplex
Food Machinery Lubricant results in longer bearing life, fewer
equipment repairs, less downtime and lower lubricant consumption.
• Formulated with high-viscosity pure
food grade base oil
• Registered NSF H1 for incidental
• Certified Kosher Pareve
• Certified Halal by IFANCA
• Will not wash out or emulsify when
coming in contact with water
• Stays in contact zone, even in highmoisture
o Won’t wash out of bearings
• Protects against rust and corrosion
• Performs well in a broad
• Provides excellent service at
moderately high temperatures
• Will not melt or run from bearings
General Purpose Grease (400g)
• Almatek 1233 General Purpose
• Extremely Tacky & Waterproof grease for pin & bush applications
• Highly versatile general purpose lubricant for friction & anti-friction bearings, chassis points
• Resists wash out, shock loading & pound out
• The original “Truck & Farm Grease” for use in earthmoving applications, extends lube intervals and reduces pin and bush wear
Size: 10 Tube.