- No products in the cart.
4059 H1 QUINPLEX® Penetrating Oil & Lubricant
Free
Be the first to review “4059 H1 QUINPLEX® Penetrating Oil & Lubricant”
Related Products
-
Almatec – General Purpose Lubricant with ” Tack”
General Purpose Grease (400g)
• Almatek 1233 General Purpose
• 400gm
• Extremely Tacky & Waterproof grease for pin & bush applications
• Highly versatile general purpose lubricant for friction & anti-friction bearings, chassis points
• Resists wash out, shock loading & pound out
• The original “Truck & Farm Grease” for use in earthmoving applications, extends lube intervals and reduces pin and bush wearSize: 10 Tube.
-
Wirelife® Almasol® Coating Lubricant – 2002
Wirelife® Almasol® Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal
and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects
better than any product available. When used in conjunction with Wirelife Monolec® Penetrating Lubricant, maximum
protection and wear reduction is achieved. In addition to its primary function as a coating, it also provides moderate penetration – depending on the tightness of tolerances and the temperature when applied. It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a self-healing, nontacky, protecting film that is highly resistant to wash-off from both fresh and salt water. -
1059Monolec – Pre-Mix 2 Cycle Engine Oil
$ 36.95LE’s 8104 MONOLEC® Two-Cycle Engine Oil’s special formulation instantly disperses in the fuel. This and other exclusive features of LE’s 8104 MONOLEC® Two-Cycle Engine Oil help achieve optimum performance in two-cycle engines. LE’s 8104 is blended with paraffinic base oils for greater film strength, lubricity and high natural Viscosity index. It contains MONOLEC®, LE’s exclusive wear-reducing additive.
In two-cycle engines, lubrication is achieved by mixing the lubricant with the fuel, and using the fuel coming into the carburetor as a carrier for the oil. Lubrication of the entire engine must be accomplished in a single pass through the system. The fuel/oil/air mixture passes from the carburetor into the combustion chamber in a split second, where high temperatures instantly vaporize the gasoline. The oil, in droplet form, must lubricate all moving parts of the crankshaft, plus the piston and cylinder. If combustion of the oil is incomplete, or by-products are deposited in the cylinder, serious problems can develop such as spark plug fouling, clogging and restriction of intake ports, piston ring sticking or piston scuffing.
Lot Size: 1 Pint.1059 -
Almaplex® Ultra-Syn Lubricant – 1299
Almaplex Ultra-Syn Lubricant has the power to increase equipment uptime and enhance bottom line profitability by offering exceptional quality, versatility and reliability. A heavy-duty synthetic grease containing LE’s proprietary additives Almasol® and Quinplex®, Almaplex Ultra-Syn provides optimum performance under extreme operating conditions. It is an aluminum complex thickened grease
made with an ISO 460 viscosity synthetic base fluid, a combination that provides superior high-temperature functionality, low-temperature pumpability and excellent performance in the presence of water. Almaplex 1299 & 1298 (NLGI grades 2 & 1, respectively) provide 73 percent higher extreme pressure performance than competitive grease, as indicated by the results of the Four Ball EP Test. In the Water Spray-Off Test, competitive greases lost almost six times more grease. This performance offers the potential for
energy savings and reduced operating temps in applications such as construction, agriculture, mining, steel mills and paper mills; hammer mills; extruders and ball mills. Almaplex 1299 can be used in couplings where AGMA CG-1, CG-2 and CG-3
lubricants are recommended.Almaplex 1295 is an NLGI grade 000 semifluid grease that has superior film strength because of its synthetic high viscosity base oil. It is excellent for use in heavily loaded bearings in cold temperature applications. It performs well in any gearbox that requires a semifluid grease, particularly enclosed gearboxes where housings and seals have lost their ability to retain conventional gear oils.
-
Monolec 4622 – Multiplex Lubricant, Bearing Grease
Monolec® Multiplex Lubricant (4622) is a highly versatile, long-life, lithium-complex-thickened grease designed for extreme pressure (EP) performance in a variety of farm, fleet, industrial and marine applications. It provides dependable performance in a broad operating temperature range in chassis, wheel bearings and other critical grease points.
Size: 10 Tube.
-
Monolec Ultra Engine Oil – SAE 20W – 50
Monolec® Engine Oil is a 20W-50 oil specially formulated for extended drain service in both on-road and off-road gasoline and diesel engines. This high-viscosity oil provides superior film strength even at high temperatures, protecting the engine from wear and damage. It has an excellent oxidation stability and detergency package that helps protect the engine, keeping it clean and protecting it from wear. It also contains wear-reducing additives that provide an additional layer of protection from friction and heat.
Monolec Engine Oil is especially suited for use in air-cooled four-stroke motorcycle engines, racing engines and other high temperature applications. It is also suited for diesel engines and can be used to help extend drain intervals and improve fuel efficiency when combined with an oil analysis program. It has been formulated to protect low-emission engines, and is backwards compatible for use in older diesel engines. Power sports enthusiasts and diesel engine operators alike depend on Monolec Engine Oil to deliver unsurpassed performance year-round, regardless of environmental and operating conditions.
-
804 – H1 SILICONE SPRAY
Silicone-based spray for use as a lubricant with
incidental food contact. May be used on machine
parts and equipment in locations in which there is
potential exposure of the lubricated part to food.
For food plant and other industrial use.FEATURES:
Silicone Lubricant
Non-staining
Low odor
May be used for incidental food contact
USDA authorized for use in federally inspected meat and poultry plantsAPPLICATIONS:
Food processing equipment
Food packaging equipment
Lock mechanisms
Rubber door and window seals
Ironing and pressing equipment
Cutting tables for smooth and even cutting
Vending equipment
Molding equipment
Dry cleaning equipment -
Pyroshield® Syn Open Gear Grease – 5182 5180
Pyroshield Syn Open Gear Grease is a heavy-duty synthetic lubricant developed for large unshrouded open gears in the mining,
mineral processing and cement industries, and for other severe service applications that require a lubricant with superior wear
protection, exceptional load-carrying ability, outstanding tackiness and ease of application at various temperatures. It also works well for applications in which gears experience high point-of-contact temperatures of 327°C (620°F) and above.A product of advanced lubricant technology providing boundary lubrication, unmatched performance and versatility, Pyroshield
Syn Open Gear Grease is formulated with high-viscosity 100 percent synthetic base oil, a non-melting thickening system
and LE’s proprietary heat stable additives. It contains a synergistic mix of Almasol®, LE’s exclusive wear-reducing additive, and
a unique combination of extreme pressure additives.
Reviews
There are no reviews yet.