Monolec® Multiplex Lubricant (4622) is a highly versatile, long-life, lithium-complex-thickened grease designed for extreme pressure (EP) performance in a variety of farm, fleet, industrial and marine applications. It provides dependable performance in a broad operating temperature range in chassis, wheel bearings and other critical grease points.
Size: 10 Tube.
LE's 9102 SYNTEMP® Synthetic Lubricant is a unique, heavy duty, high temperature spray lubricant designed for open gears, chains, cables, sealed bearings and slides – or any “tight” area where grease lubrication can be best accomplished by the spray method. Its superior lubricating qualities reduce wear, friction and heat far more effectively than ordinary greases.
This high temperature grease is water resistant, non-melting, rust and oxidation resistant, mechanically stable, has EP characteristics and contains MONOLEC®, LE's exclusive wear-reducing additive.
Lot Size: 12 Cans.
Wirelife® Almasol® Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal
and protect against fretting corrosion, wear and rust – even under extreme load and moisture. It seals and protects
better than any product available. When used in conjunction with Wirelife Monolec® Penetrating Lubricant, maximum
protection and wear reduction is achieved. In addition to its primary function as a coating, it also provides moderate penetration – depending on the tightness of tolerances and the temperature when applied. It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a self-healing, nontacky, protecting film that is highly resistant to wash-off from both fresh and salt water.
9200 Almasol Dry Film Lubricant is an air drying solid film lubricant, containing a carefully selected blend of Almasol and other solid lubricants of controlled particle size, dispersed in a fast drying solvent system and resin binder. The resulting film has good adhesion and exceptional wear life. The dry, solid film lubricant prevents galling and seizing of mating metal surfaces under operating
conditions of high loads and slow speeds. It will cure at room temperature and lubricate effectively over a broad temperature range: -100°F to 650°F (-73°C to 343°C) [1000°F (537°C) in the absence of oxygen].
use, Almaplex Industrial Lubricant is extremely versatile, minimizing inventory requirements and misapplication because it works in many different applications. It is especially effective in severe operations caused by moisture or high temperatures. Its robust aluminum complex formulation seals out water and other contaminants that can wreak havoc on the long-term life of equipment.
Almaplex Industrial Lubricant protects against oxidation, rust and corrosion, and its exceptional wear reduction has led LE customers
worldwide to redefine “normal” or “expected” equipment life. With longer bearing life, fewer repairs, less downtime and lower lubricant consumption, switching to Almaplex has helped many companies lower their maintenance costs.
H1 Quinplex® Food Machinery Lubricant (4025-4022) is a semisynthetic
grease suitable for a broad operating temperature range.
In addition to being a food grade grease – NSF H1 registered for
incidental food contact – it is also robust enough to withstand
moisture, high temperatures, extreme pressures and other harsh
conditions found at food manufacturing plants. It features an
aluminum complex thickener base, providing extreme water
resistance, excellent mechanical stability, reversibility and tackiness.
Key additives include Quinplex, LE’s proprietary impact-resistant
additive, and a rust and oxidation inhibitor. Switching to H1 Quinplex
Food Machinery Lubricant results in longer bearing life, fewer
equipment repairs, less downtime and lower lubricant consumption.
• Formulated with high-viscosity pure
food grade base oil
• Registered NSF H1 for incidental
• Certified Kosher Pareve
• Certified Halal by IFANCA
• Will not wash out or emulsify when
coming in contact with water
• Stays in contact zone, even in highmoisture
o Won’t wash out of bearings
• Protects against rust and corrosion
• Performs well in a broad
• Provides excellent service at
moderately high temperatures
• Will not melt or run from bearings
Pyroshield Syn Open Gear Grease is a heavy-duty synthetic lubricant developed for large unshrouded open gears in the mining,
mineral processing and cement industries, and for other severe service applications that require a lubricant with superior wear
protection, exceptional load-carrying ability, outstanding tackiness and ease of application at various temperatures. It also works well for applications in which gears experience high point-of-contact temperatures of 327°C (620°F) and above.
A product of advanced lubricant technology providing boundary lubrication, unmatched performance and versatility, Pyroshield
Syn Open Gear Grease is formulated with high-viscosity 100 percent synthetic base oil, a non-melting thickening system
and LE’s proprietary heat stable additives. It contains a synergistic mix of Almasol®, LE’s exclusive wear-reducing additive, and
a unique combination of extreme pressure additives.
Almaplex Ultra-Syn Lubricant has the power to increase equipment uptime and enhance bottom line profitability by offering exceptional quality, versatility and reliability. A heavy-duty synthetic grease containing LE’s proprietary additives Almasol® and Quinplex®, Almaplex Ultra-Syn provides optimum performance under extreme operating conditions. It is an aluminum complex thickened grease
made with an ISO 460 viscosity synthetic base fluid, a combination that provides superior high-temperature functionality, low-temperature pumpability and excellent performance in the presence of water. Almaplex 1299 & 1298 (NLGI grades 2 & 1, respectively) provide 73 percent higher extreme pressure performance than competitive grease, as indicated by the results of the Four Ball EP Test. In the Water Spray-Off Test, competitive greases lost almost six times more grease. This performance offers the potential for
energy savings and reduced operating temps in applications such as construction, agriculture, mining, steel mills and paper mills; hammer mills; extruders and ball mills. Almaplex 1299 can be used in couplings where AGMA CG-1, CG-2 and CG-3
lubricants are recommended.
Almaplex 1295 is an NLGI grade 000 semifluid grease that has superior film strength because of its synthetic high viscosity base oil. It is excellent for use in heavily loaded bearings in cold temperature applications. It performs well in any gearbox that requires a semifluid grease, particularly enclosed gearboxes where housings and seals have lost their ability to retain conventional gear oils.
Monolec® Engine Oil is a 20W-50 oil specially formulated for extended drain service in both on-road and off-road gasoline and diesel engines. This high-viscosity oil provides superior film strength even at high temperatures, protecting the engine from wear and damage. It has an excellent oxidation stability and detergency package that helps protect the engine, keeping it clean and protecting it from wear. It also contains wear-reducing additives that provide an additional layer of protection from friction and heat.
Monolec Engine Oil is especially suited for use in air-cooled four-stroke motorcycle engines, racing engines and other high temperature applications. It is also suited for diesel engines and can be used to help extend drain intervals and improve fuel efficiency when combined with an oil analysis program. It has been formulated to protect low-emission engines, and is backwards compatible for use in older diesel engines. Power sports enthusiasts and diesel engine operators alike depend on Monolec Engine Oil to deliver unsurpassed performance year-round, regardless of environmental and operating conditions.